| Statistics |
Total online: 1 Guests: 1 Users: 0 |
|
Main » 2013 » November » 16 » How to Remove Ceramic Tiles
6:50 AM How to Remove Ceramic Tiles |
| How to Remove Ceramic Tiles Given the amount of work involved, and the degree of
difficulty, when you're looking at removing ceramic tiles on the wall or floor,
give some consideration to whether you might be better off just replacing the
cracked or damaged ones. Of course, if you can't get matching ones, that means
doing the whole job over, but when you do, remember to buy enough tiles that you
have extras, so that it won't need to be repeated again, should you ever have a
couple of them damaged.Before starting a removal job, decide whether you have
anything there worth salvaging. It could be that while you want to redecorate
the shower stall, that tile would like great on the wall in the laundry room.
And it can be used over again, as long as you are careful in removing it.
Ceramic tile has lots of compression strength, but very little tensile strength.
That means you can put weight on it, but to twist or bend the piece, will likely
break it.First, you'll need to remove any trim that covers the edges of the
tiles. Next, remove all the grout you can between the tiles. They're glued to
your wall or floor, so nothing is going to fall off when you do this Charlotte Olympia. But the grout
must be removed, because in attaching them all together, it's like creating one
giant sheet of ceramic, and it will be just as brittle as a single tile. So
forcing one tile, can end up breaking a number of them.Once the grout is cleaned
away, take a very thin putty knife and start by working a corner under the edge
of one tile post by haiyan701. Work along the top, gradually inserting more of
the blade as you go. You can use a hammer to gently tap the handle of the knife
to help insert it. When the blade is about halfway down the back of the tile,
you can exert slow, upward pressure, which should pop the tile off Charlotte
Olympia Birthday Virgo Zodiac Smoking Slipper In Beige.If you plan to re-use
the tile, the backs will need to be cleaned, either with an adhesive remover, or
by grinding, if they were applied with thinset.
<
|
|
Views: 287 |
Added by: gfg
| Rating: 0.0/0 |
|
|
|
